Installation¶
Unsurprisingly, pylibftdi depends on libftdi, and installing this varies according to your operating system. Chances are that following one of the following instructions will install the required prerequisites. If not, be aware that libftdi in turn relies on libusb.
Installing pylibftdi itself is straightforward - it is a pure Python package (using ctypes for bindings), and has no dependencies outside the Python standard library for installation. Don’t expect it to work happily without libftdi installed though :-)
$ pip install pylibftdi
Depending on your environment, you may want to use either the --user
flag,
or prefix the command with sudo
to gain root privileges.
Windows¶
I perform only limited testing of pylibftdi on Windows, but it should work correctly provided the requirements of libftdi and libusb are correctly installed.
Recent libftdi binaries for Windows seem to be available from the picusb project on Sourceforge. Download libftdi1-1.1_devkit_x86_x64_21Feb2014.zip or later from that site, which includes the required
Installing libraries on Windows is easier with recent versions of Python (2.7.9, 3.4+) installing pip directly, so the standard approach of pip install pylibftdi will now easily work on Windows.
Mac OS X¶
I suggest using homebrew to install libftdi:
$ brew install libftdi
On OS X Mavericks (and presumably future versions) Apple include a driver for
FTDI devices. This needs unloading before libftdi
can access FTDI devices
directly. See the Troubleshooting section for instructions.
Linux¶
There are two steps in getting a sensible installation in Linux systems:
- Getting
libftdi
and its dependencies installed - Ensuring permissions allow access to the device without requiring root
privileges. Symptoms of this not being done are programs only working
properly when run with
sudo
, giving ‘-4’ or ‘-8’ error codes in other cases.
Each of these steps will be slightly different depending on the distribution
in use. I’ve tested pylibftdi
on Debian Wheezy (on a Raspberry Pi),
Ubuntu (various versions, running on a fairly standard ThinkPad laptop),
and Arch Linux (running on a PogoPlug - one of the early pink ones).
Debian (Raspberry Pi) / Ubuntu etc¶
On Debian like systems (including Ubuntu, Mint, Debian, etc), the package libftdi-dev should give you what you need as far as the libftdi library is concerned:
$ sudo apt-get install libftdi-dev
The following works for both a Raspberry Pi (Debian Wheezy) and Ubuntu 12.04, getting ordinary users (e.g. ‘pi’ on the RPi) access to the FTDI device without needing root permissions:
Create a file
/etc/udev/rules.d/99-libftdi.rules
. You will need sudo access to create this file.Put the following in the file:
SUBSYSTEMS=="usb", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6001", GROUP="dialout", MODE="0660" SUBSYSTEMS=="usb", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6014", GROUP="dialout", MODE="0660"
Some FTDI devices may use other USB PIDs. You could try removing the match on
idProduct altogether, just matching on the FTDI vendor ID. Or Use lsusb or
similar to determine the exact values to use (or try checking dmesg output on
device insertion / removal). udevadm monitor --environment
is also helpful,
but note that the environment ‘keys’ it gives are different to the attributes
(filenames within /sys/devices/...) which the ATTRS will match. Perhaps ENV{}
matches work just as well, though I’ve only tried matching on ATTRS.
Note that changed udev rules files will be picked up automatically by the udev daemon, but will only be acted upon on device actions, so unplug/plug in the device to check whether you’re latest rules iteration actually works :-)
See http://wiki.debian.org/udev for more on writing udev rules.
Arch Linux¶
The libftdi package (sensibly enough) provides the libftdi library:
$ sudo pacman -S libftdi
Similar udev rules to those above for Debian should be included (again in
/etc/udev/rules.d/99-libftdi.rules
or similar), though the GROUP directive
should be changed to set the group to ‘users’:
SUBSYSTEMS=="usb", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6001", GROUP="users", MODE="0660"
SUBSYSTEMS=="usb", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6014", GROUP="users", MODE="0660"
Testing installation¶
Connect your device, and run the following (as a regular user):
$ python -m pylibftdi.examples.list_devices
If all goes well, the program should report information about each connected
device. If no information is printed, but it is when run with sudo
, a
possibility is permissions problems - see the section under Linux above
regarding udev rules.
If the above works correctly, then try the following:
$ python -m pylibftdi.examples.led_flash
Even without any LED connected, this should ‘work’ without any error - quit with Ctrl-C. Likely errors at this point are either permissions problems (e.g. udev rules not working), or not finding the device at all - although the earlier stage is likely to have failed if this were the case.
Feel free to contact me (@codedstructure) if you have any issues with installation, though be aware I don’t have much in the way of Windows systems to test.